Showing 10–18 of 89 results
-
Alloy Steel Q345R
The Nickel 201 alloys is an alloy that contains commercially pure wrought Nickel and has good mechanical properties that extend over a wide range of temperatures. The Nickel alloy 201 has excellent resistance to many corrosives, hydroxides in particular.
Nickel 201 has similar properties to Nickel 200. However, due to its lower carbon content, Nickel 201 can better prevent embrittlement by inter-granular carbon at elevated temperatures.
Nickel 201 has native properties to provide strong resistance to corrosion in acids and alkalis. It is especially useful under reducing conditions. The alloy has outstanding resistance to caustic alkalis, which includes its molten state. The alloy shows good resistance in acid, alkaline, and neutral salt solutions.
However, when Nickel 201 is in oxidizing salt solutions severe corrosion will occur. The Nickel 201 alloy is resistant to all dry gases at room temperature. In dry chlorine and hydrogen chloride, Nickel 201 alloy may be used in temperatures up to 550 °C. Its resistance to mineral acids varies according to temperature, concentration, and solution aeration. Its corrosion resistance displays better in de-aerated acid.
-
ASTM B466 C70600 Copper Nickel Seamless Pipes and Tubes
ASTM B466 C70600 Copper Nickel Seamless Pipes and Tubes (CUPRO NICKEL Pipes and Tubes), Copper Nickel 90/10 Pipes and Tubes, ASTM B466 90/10 Copper Nickel Seamless Pipes, ASME SB466 90/10 Copper Nickel Pipes and Tubes, ASTM B466 C70600 Copper Nickel Seamless Pipes, ASTM B466 CU-NI 90-10 Seamless Pipes, ASTM B466 C70600 Cupro Nickel Seamless Pipes and Tubes.
-
Austenitic SS 254
Stainless steel grade 254 SMO™ is a very high end austenitic stainless steel. It is designed with a combination of impact toughness resistance to chloride stress corrosion cracking, and pitting and crevice corrosion with strength that is twice that of the stainless steel 300 series.
For certain applications, grade 254 SMO™ has been reported to be a cost-effective substitute for high nickel and titanium alloys. It is known to possess excellent workability as well.
-
Austenitic SS 303
AISI 303 (SUS 303) Grade Stainless Steel
Stainless steel type 1.4305 is popularly known as grade 303 stainless steel. Grade 303 is the most readily machineable of all the austenitic grades of stainless steel. The machineable nature of grade 303 is due to the presence of Sulphur in the steel composition. Whilst the Sulphur improves machining, it also causes a decrease in the corrosion resistance and a slight lowering of the toughness. Alloy 409 is available as round / flat / sheet /hexagonal plate/ square /coil / pipe & fittings. The corrosion resistance of type 303 is lower than that for 304. The toughness is still excellent as with other austenitic grades. Property data given in this document is typical for bar products covered by ASTM A582. ASTM, EN or other standards may cover products sold by Tecni-Cable Ltd. It is reasonable to expect specifications in these standards to be similar but not necessarily identical to those given in this datasheet.
-
Austenitic SS 316
Stainless Steel 316 Is The Standard Molybdenum-bearing Grade, Second In Importance To Ss 304 Amongst The Austenitic Stainless Steels. The Molybdenum Gives Ss 316 Better Overall Corrosion Resistant Properties Than Stainless Steel 304, Particularly Higher Resistance To Pitting And Crevice Corrosion In Chloride Environments. Stainless Steel 316 Has Excellent Forming And Welding Characteristics. It Is Readily Brake Or Roll Formed Into A Variety Of Parts For Applications In The Industrial, Architectural, And Transportation Fields. Ss 316 Also Has Outstanding Welding Characteristics. Post-weld Annealing Is Not Required When Welding Thin Sections.
