• Stainless-Steel-304lAustenitic SS 304L

    Austenitic SS 304L

  • incoloy-800ht-rodIncoloy Rod

    Incoloy Rod

    Our Incoloy 800 Rod, Bar, and Wires exhibit oxidation resistance. This alloy has good carburization resistance. The Inconel 800 alloy is very useful if it can keep its structural integrity at high temperatures.
    These bars are significantly more resistant to chloride-ion-induced embrittlement thanks to the nickel presence. It also can withstand stress corrosion cracking due to the sigma phase’s precipitation.

  • stainless-steel-pipes-347Austenitic SS 630

    Austenitic SS 630

    Grade 630 stainless steels are martensitic stainless steels that are precipitation hardened to achieve excellent mechanical properties. These steel achieve high strength and hardness following heat treatment. The heat and corrosion resistance of grade 630 are similar to that of grade 304 steels. This grades is also commonly referred to as grade 17-4PH.

  • duplex-329-round-bars-2c-din-1-4460-2c-uns-s32900-round-barsDuplex Stainless Steel 329

    Duplex Stainless Steel 329

    One of the earliest duplex steel which is reflected in its higher permitted carbon content. Its resistance to pitting (PREN about 32) and to crevice corrosion is below that of super duplex steels, therefore use in seawater is limited. Exposure to moderate and high temperature and less rapid cooling may cause embrittlement. Accordingly, design stress values in ASME II do not extend above 260°C for S32900. Impact values are high at room temperature. However, the proportion and orientation of ferrite in welds and base material may significantly affect toughness at subzero temperatures.

  • titanium-wire-grade-1Titanium Wire Gr 1

    Titanium Wire Gr 1

    Titanium Grade 1 Commercially Pure A35 Wire UNS R50250 (CP TI35A)

    Commercially pure Titanium Grade 1 is soft/ductile grade exhibiting the greatest formability.

  • Alloy-36Alloy 36 Wire UNS K93600

    Alloy 36 Wire UNS K93600

    Alloy 36 is a nickel-iron alloy which maintains constant dimensions over the range of normal atmospheric temperatures.

  • hot_rolled_mirror_polished_416_stainless_steel_bar_od_12mm_aisiStainless Steel 416

    Stainless Steel 416

    Grade 416 steel is a free-machining stainless steel with a machinability of 85%, highest of all stainless steels. With most of the free-machining stainless steels, the machinability can be improved by adding sulphur, which leads to the formation of manganese sulphide inclusions. Addition of sulphur also reduces the formability, weldability and corrosion resistance of 416 steels to below that of grade 410. Because of their high machinability and low cost, grade 416 steels are available in highly tempered, hardened or unhardened forms.

  • inconel-718-rodInconel 718

    Inconel 718

    INCONEL® alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium material used at -423° to 1300°F. 
    The age-hardenable alloy can be readily fabricated, even into complex parts. Its welding characteristics, especially its resistance to postweld cracking, are outstanding. The ease and economy with which INCONEL alloy 718 can be fabricated, combined with good tensile, fatigue, creep, and rupture strength, have resulted in its use in a wide range of applications. Examples of these are components for liquid fueled rockets, rings, casings and various formed sheet metal parts for aircraft and land-based gas turbine engines, and cryogenic tankage. It is also used for fasteners and instrumentation parts.

  • nickel-alloy-coilsNickel 99/5%

    Nickel 99/5%

    The Nickel 201 alloys is an alloy that contains commercially pure wrought Nickel and has good mechanical properties that extend over a wide range of temperatures. The Nickel alloy 201 has excellent resistance to many corrosives, hydroxides in particular.

    Nickel 201 has similar properties to Nickel 200. However, due to its lower carbon content, Nickel 201 can better prevent embrittlement by inter-granular carbon at elevated temperatures.

    Nickel 201 has native properties to provide strong resistance to corrosion in acids and alkalis. It is especially useful under reducing conditions. The alloy has outstanding resistance to caustic alkalis, which includes its molten state. The alloy shows good resistance in acid, alkaline, and neutral salt solutions.

    However, when Nickel 201 is in oxidizing salt solutions severe corrosion will occur. The Nickel 201 alloy is resistant to all dry gases at room temperature. In dry chlorine and hydrogen chloride, Nickel 201 alloy may be used in temperatures up to 550 °C. Its resistance to mineral acids varies according to temperature, concentration, and solution aeration. Its corrosion resistance displays better in de-aerated acid.

  • 309-stainless-steel-sheetAustenitic SS 309

    Austenitic SS 309

  • 825-incoloy-square-barsIncoloy Square Bar

    Incoloy Square Bar

    We at, Sagar Steel Centre manufacturing co. is one of the leading company in the field of manufacturing export quality Incoloy 825 Square Bar. These Square Bar are made of using Finest Nickel Alloys. These Incoloy 825 Square Bar are essentially used as a Connector between the bar at the middle. They are also used as a plug in to resist pressure in Pressure Valves. These have huge demand in many large scale industrial purposes. Our Incoloy 825 Square Bar are one of the best selling known for its durable leak-proof property.

  • Copper-Nickel-ASTM-B466-ManufacturerASTM B466 C70600 Copper Nickel Seamless Pipes and Tubes

    ASTM B466 C70600 Copper Nickel Seamless Pipes and Tubes

    ASTM B466 C70600 Copper Nickel Seamless Pipes and Tubes (CUPRO NICKEL Pipes and Tubes), Copper Nickel 90/10 Pipes and Tubes, ASTM B466 90/10 Copper Nickel Seamless Pipes, ASME SB466 90/10 Copper Nickel Pipes and Tubes, ASTM B466 C70600 Copper Nickel Seamless Pipes, ASTM B466 CU-NI 90-10 Seamless Pipes, ASTM B466 C70600 Cupro Nickel Seamless Pipes and Tubes.