Call us toll free: +(91)-(22)-66363232
Send us an email: SAGARSTEELS@HOTMAIL.COM
Mon - Sat :10:00 am to 7:00 pm Sun : Closed
  1. Home
  2. Titanium Wire Gr 5

Titanium Wire Gr 5

titanium-grade-5-wire
titanium-grade-5-wire

Titanium Wire Gr 5

Grade 5 Titanium (Ti-6Al-4V) Wire UNS R56400

Grade 5 Titanium (Ti-6Al-4V) is stronger than commercially pure titanium alloys.

Titanium Gr.5 Spool Wire, Titanium UNS R56400 Welding Wire, Grade 5 Titanium Filler Wires, Ti. Alloy Gr.5 MIG wire, Grade 5 Titanium Tig Wire, Titanium Gr.5 Electrode Wire, Titanium Gr.5 Coil Wire, ASTM B863 Ti Gr.5 Flux Cored Wires, Titanium R56400 Wire, Ti. Alloy Gr.5 Wire Suppliers and Exporters.

Titanium UNS R56400 Tig Wire, Titanium UNS R56400 Spool Wire, Titanium UNS R56400 Bright Wire, Titanium Gr.5 Welding wire, Titanium 3.7165 Coil wire, Grade 5 Titanium Electrode Wire, Exporters of ASTM SB863 Titanium Gr 2 Wire, Titanium R56400 MIG Wire Manufacturer in India.

Request quote
Category: Tag:

Description

Grade 5 Titanium (6-4) Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated ASTM B265, AMS 4911, AMS 4928

GRADE 5 TITANIUM 6AL-4V ALLOY DESCRIPTION

Stronger than commercially pure titanium alloys is titanium 6Al-4V (Grade 5). Containing 6% Aluminum and 4% Vanadium, this alloy has many advantages, among them being that the alloy is heat treatable, has an excellent combination of strength, corrosion resistance, weldability and formability.

APPLICATIONS

  • Tension set rings
  • Bolts
  • bicycle part
  • Biomedical implant
  • High-temperature structural applications in the aircraft industry

CHEMISTRY TYPICAL

Titanium: Balance
Vanadium: 4.0
Aluminum: 6.0
Hydrogen: 0.015 max
Nitrogen: 0.02 max
Carbon: 0.10 max
Iron: 0.25 max
Residual each: 0.10 max., total 0.40 max

COMMON TITANIUM GRADE NAMES

Name Code Description 1 Description 2 ASTM AMS UNS
Grade 5 Titanium 6-4 Titanium Alloy 6% Aluminum, 4% Vanadium R56400

 

PHYSICAL PROPERTIES

Density, 0.16 lbs/in³, 4.43 g/cm³

Mean Coefficient of Thermal Expansion: in/in/°F (mm/m/°C):
70- 212°F (20- 100°C): 4.78 x 10 (8.6)

Thermal Conductivity: BTU-in/h-ft-°F (W/m-°K):
At 70°F (21°C): 46.5 (6.7)

Modulus of Elasticity: KSI (MPa)
16.5 x 10³ (113.8 x 10³) in tension

Melting Point: 3020°F (1660°C)

MECHANICAL PROPERTIES AT ROOM TEMPERATURE

PROPERTIES: ANNEALED (TYPICAL)

Ultimate Tensile Strength: 135 KSI (950 MPa)
Yield Strength (0.2% offset): 125 KSI (880 MPa)
Elongation: 15%
Hardness: Rc 34

PROPERTIES: TEMPERED

Contact Ulbrich Wire with requirements.

ADDITIONAL PROPERTIES

TI-6AL-4V CORROSION RESISTANCE

Refer to NACE (National Association of Corrosion Engineers) for recommendations.

FINISHES

Inquire with Ulbrich Wire

FORMS

  • Continuous Coils
  • Cut to length
  • Precision cutting

HEAT TREATMENT OF TI-6AL-4V

Titanium 6-4 (Grade 5) be hardened by cold working and heat treating.

Reviews

There are no reviews yet.

Be the first to review “Titanium Wire Gr 5”

Related products

  • titanium-wire-grade-1Titanium Wire Gr 1

    Titanium Wire Gr 1

    Titanium Grade 1 Commercially Pure A35 Wire UNS R50250 (CP TI35A)

    Commercially pure Titanium Grade 1 is soft/ductile grade exhibiting the greatest formability.

  • Titanium-alloy-grade-4Titanium Gr 4

    Titanium Gr 4

    Commercially Pure Titanium Grade 4 is the highest strength pure unalloyed Titanium with high oxygen and extra high strength. Grade 4 displays the highest strength of all the unalloyed CP grades. It combines excellent corrosion resistance with good formability and weldability. Mainly used in hydraulic and instrumentation tubing. Generally chosen for its corrosion resistance in a variety of chemical process equipment as well as marine and airframe applications. It can be used for parts requiring strength up to 400 ° F and oxidation resistance to 600 ° F.

  • titanium-gr2Titanium Gr 22

    Titanium Gr 22

    Commercially pure titanium alloys contain small amounts of oxygen and iron that influence mechanical properties. Each commercial grade is produced to provide properties suited for different applications.

    Grade 2 Unalloyed Ti (“Pure”) 50A alloy is the most commonly used and widely available grade of unalloyed titanium. It is non-magnetic. This alloy has been approved for sour service use under the NACE MR-01-75 Standard.

    Grade 2 is widely used because it combines excellent formability and moderate strength with superior corrosion resistance. This combination of properties makes CP Grade 2 titanium a candidate for a large variety of chemical and marine as well as aerospace and medical applications.

    Titanium Grade 2  UNS R50400, Of the four commercially pure (C.P.) titanium grades, Grade 2 is typically used in applications that require superior corrosion resistance in various aggressive media. Corrosion resistance is similar between these four C.P. grades but mechanical properties vary along with varying oxygen and iron contents.

    Typical applications for the “C.P.” grades include chemical process, petroleum refining, biomedical as well as heat exchangers in an array of different applications. Continuous service temperatures can reach up to 800°F with occasional, intermittent service at 1000°F.

    Titanium’s C.P. grades corrosion resistance comes from a strongly adherent, stable, protective oxide film, which forms in the presence of oxygen. This film makes the commercially pure titanium grades resistant to most oxidizing, neutral and inhibited reducing as well as mildly reducing environments. Strong reducing media may cause heavy corrosion.

  • titanium-grade-6-rods-1Titanium Gr 6

    Titanium Gr 6

    Titanium alloys are light weight and have excellent corrosion resistance, very high tensile strength and toughness. These properties remain unaffected to a great extent even at extreme temperatures. The durability of these alloys make them viable for several industries such as aerospace, military, automobile, consumer electronics, and sports equipment.

    Grade 6 Ti-5Al-2.5Sn alloy has high service temperature of 480°C (896°F), medium strength, and excellent weldability and fabricability. This alloy has good oxidation resistance and microstructure stability; however it is not heat-treatable.

X